| Author |
 Topic  |
|
bmidgley
Starting Member
30 Posts |
 Posted - 08/13/2006 : 00:07:37
|
| Rotation started working on my ubuntu install on p1510d when I installed the package xserver-xorg-video-i810 from edgy. It may have worked from dapper too but I didn't try that first. |
 |
|
|
obscurite
Starting Member
33 Posts |
Posted - 08/13/2006 : 02:55:53
|
| Thanks. That's great news! |
|
|
|
bmidgley
Starting Member
30 Posts |
|
|
argotnaut
Starting Member
USA
24 Posts |
Posted - 03/01/2007 : 02:00:21
|
| FYI ... I'm running a testing version of Kubuntu Feisty, with the driver from conan.de installed. An update from a few days ago broke my touchscreen driver. :( I'm guessing it was an xorg update but not sure. The version is xorg 1:7.20-ubuntu1. |
|
|
|
argotnaut
Starting Member
USA
24 Posts |
Posted - 03/03/2007 : 15:06:27
|
I reinstalled Kubuntu, held back xorg 7.1, and upgraded everything else. The touchscreen worked again, so I can confirm that it's xorg 7.2 that breaks this driver. |
|
|
|
jjordan
Starting Member
6 Posts |
Posted - 05/09/2007 : 05:47:35
|
Update:
I'm running Kubuntu 7.04 (installed from and rc and updated). Most everything works great out of the box.
SD slot works
CF slot works
keyboard works
touchstik works
touchscreen works (I use Sam Engstrom's driver)
screen rotation works (not automatic use xrandr or krandrtray or best use a script that calls the touchscreen)
cpu freq scaling works
suspend works
hibernate works (I don't use it often so I haven't tested for a couple of weeks)
I don't have internal Bluetooth but external works great
external/dual monitor works (1680 X 1050 twinhead setup)(requires configuration and i915resolution)
external HD/DVD's work
screen brightness does not work unless you directly write to the file. (someday I will write a script and attach it to the function keys)
buttons in screen bezel do not work (no clue where to start).
for notetaking look at Jarnal
for text input look at OneStroke (make your own stroke file)
for on screen keyboard I use Klavier but there are several to choose from
for handwriting recognition give up for now (doesn't work that well in Windows either)
for ebooks look at FBReader (it really needs an easier way to turn pages)
-j
|
|
|
|
oren
Starting Member
15 Posts |
Posted - 06/26/2007 : 03:08:01
|
I try to make the touchscreen work with Ubuntu 7.04 -
(I am relatively am new to Linux)
I want to try both options(samengstrom/conan).
let's start with conan.
"Copy the file "fujitsu_drv.o" to the appropriate location ("/usr/X11R6/lib/modules/input"). Insert the lines below to the file "/etc/X11/XF86Config-4" or "/etc/X11/xorg.conf"."
I don't have this folder, but i think i found different one in my machine - /usr/lib/xorg/modules/input/
so i moved the file, followed the instructions but nothing happend.
when i wrote update-rc.d stylus default 90 i got the 'how to use this app' text...
anyway after restart i couldn't see the GUI, it told me that i have problems with the xorg. i had to edit the xorg file (with VIM!), delete the new lines and reboot...
any ideas?
let's move to samengstrom.
I don't understand what hes instructions:
"There's now also a real X driver available here, but so far the button click actions have not been very intuitive.
If you don't have the X11::GUITest module, you can install it from the CPAN shell:
# perl -e shell -MCPAN
cpan> install X11::GUITest"
What is X11::GUITest module and how do i verify that I have it?
What is Cspan shell?
"At every boot you should run the following commands (as root):
# setserial /dev/ttyS0 irq 4 port 0x220 autoconfig
# chmod a+rwx /dev/ttyS0"
how do i run those commands at every boot?
"After that run one of these scripts in X:"
What is X and how do i run scripts inside it?
www.prosoa.com |
Edited by - oren on 06/26/2007 23:46:57 |
|
|
|
oren
Starting Member
15 Posts |
Posted - 06/27/2007 : 16:09:01
|
update:
I was able to follow conan's instruction.
the path to Xorg.conf in Ubuntu is different - it's here : /etc/X11.
But it didn't help. even after restarting i could't make it work.
btw, when i try running the setserial command-
setserial /dev/ttyS0 port 0x0220 irq 4 autoconfig
or
setserial /dev/ttyS0 uart 16550a port 0x220 irq 4
I get the message: "device or resource busy"
here is my xorg file:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
FontPath "/usr/share/fonts/X11/misc"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "touchscreen"
Driver "fujitsu"
Option "Device" "/dev/ttyS0"
Option "DeviceName" "touchscreen"
Option "MinX" "82"
Option "MinY" "146"
Option "MaxX" "4036"
Option "MaxY" "3999"
Option "SendCoreEvents" "On"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "lv3:ralt_switch"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x600"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x600"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x600"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
InputDevice "touchscreen" "CorePointer"
EndSection
Section "DRI"
Mode 0666
EndSection
www.prosoa.com |
|
|
|
argotnaut
Starting Member
USA
24 Posts |
Posted - 06/27/2007 : 16:16:41
|
I wasn't able to use the Conan driver after updating to xorg 7.2. I have no idea if it's something that can be fixed, or if it's permanently broken.
And the Engstrom driver is beyond my capabilities -- I don't know what any of those instructions mean, either. :/
Maybe someone else here or on the Ubuntu forum can help you. |
|
|
|
oren
Starting Member
15 Posts |
Posted - 06/27/2007 : 16:39:46
|
Thanks, I'll let you know if i find any info about both options.
I think it's time to learn some Perl (Engstrom's driver).
Can anyone in this forum hold our hands with Engstrom's amazing driver?
btw,how can i check my xorg version? (i use ubunu 7.04 if it's help)
and what is this thing anyway?
www.prosoa.com |
Edited by - oren on 06/27/2007 20:25:46 |
|
|
|
oren
Starting Member
15 Posts |
Posted - 06/28/2007 : 04:45:47
|
update:
I follow samengstrom and can't install X11::GUITest.
here is the error i get:
Writing Makefile for X11::GUITest
cp GUITest.pm blib/lib/X11/GUITest.pm
/usr/bin/perl /usr/share/perl/5.8/ExtUtils/xsubpp -typemap /usr/share/perl/5.8/ExtUtils/typemap -typemap typemap GUITest.xs > GUITest.xsc && mv GUITest.xsc GUITest.c
cc -c -I/usr/X11R6/include -I/usr/X/include -Wall -O2 -DVERSION=\"0.21\" -DXS_VERSION=\"0.21\" -fPIC "-I/usr/lib/perl/5.8/CORE" -DNDEBUG -DX11_GUITEST_ALT_L_FALLBACK_META_L GUITest.c
GUITest.c: In function ‘XS_X11__GUITest_GetScreenDepth’:
GUITest.c:1715: warning: ‘scr_num’ may be used uninitialized in this function
GUITest.c: In function ‘XS_X11__GUITest_GetScreenRes’:
GUITest.c:1681: warning: ‘scr_num’ may be used uninitialized in this function
GUITest.c: In function ‘XS_X11__GUITest_GetRootWindow’:
GUITest.c:956: warning: ‘scr_num’ may be used uninitialized in this function
Running Mkbootstrap for X11::GUITest ()
chmod 644 GUITest.bs
rm -f blib/arch/auto/X11/GUITest/GUITest.so
cc -shared -L/usr/local/lib GUITest.o -o blib/arch/auto/X11/GUITest/GUITest.so \
-L/usr/X11R6/lib -lXtst -lXext -lX11 \
/usr/bin/ld: cannot find -lXtst
collect2: ld returned 1 exit status
make: *** [blib/arch/auto/X11/GUITest/GUITest.so] Error 1
/usr/bin/make -- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
The guide talk about two more actions, that I am clueless about:
1. run the following 2 lines at every boot:
# setserial /dev/ttyS0 irq 4 port 0x220 autoconfig
# chmod a+rwx /dev/ttyS0
2. Run one of the scripts in X.
What are those lines do and how do I run them at every boot?
What is X and how do i run scripts inside?
Thanks
p.s
argotnaut, try this (that's what I did):
1. open the terminal (looks like a DOS screen, Applications->Accessories->Termial)
2. type this in the terminal: perl -MCPAN -e 'shell'
3. you will see this question: Are you ready for manual configuration? [yes]
4. type: n
5. wait until you see this: cpan>
6. type: install X11::GUITest
that's what i did and got the above error.
let me know if it helps.
Oren
www.prosoa.com |
|
|
|
mitchelln
New Member
66 Posts |
Posted - 06/28/2007 : 06:08:12
|
From the error it looks like you are missing the Xtst development package on your system. The linker is failing to find it. Trying searching for xtst in your distro's package manager and install the development libraries. For example, under Mandriva, if I search for xtst in the software manager it returns libXtst6.1.0.1-devel-3mdv2007.0 in the list of hits.
Once you've install the Xtst development libs it should compile up then. You're past the tricky stage. Linker dependency errors are usually pretty easy to fix.
If you let me know which Linux distribution you are using I can probably send you scripts to sort this for you.
quote:
Originally posted by oren
update:
I follow samengstrom and can't install X11::GUITest.
here is the error i get:
Writing Makefile for X11::GUITest
cp GUITest.pm blib/lib/X11/GUITest.pm
/usr/bin/perl /usr/share/perl/5.8/ExtUtils/xsubpp -typemap /usr/share/perl/5.8/ExtUtils/typemap -typemap typemap GUITest.xs > GUITest.xsc && mv GUITest.xsc GUITest.c
cc -c -I/usr/X11R6/include -I/usr/X/include -Wall -O2 -DVERSION=\"0.21\" -DXS_VERSION=\"0.21\" -fPIC "-I/usr/lib/perl/5.8/CORE" -DNDEBUG -DX11_GUITEST_ALT_L_FALLBACK_META_L GUITest.c
GUITest.c: In function ‘XS_X11__GUITest_GetScreenDepth’:
GUITest.c:1715: warning: ‘scr_num’ may be used uninitialized in this function
GUITest.c: In function ‘XS_X11__GUITest_GetScreenRes’:
GUITest.c:1681: warning: ‘scr_num’ may be used uninitialized in this function
GUITest.c: In function ‘XS_X11__GUITest_GetRootWindow’:
GUITest.c:956: warning: ‘scr_num’ may be used uninitialized in this function
Running Mkbootstrap for X11::GUITest ()
chmod 644 GUITest.bs
rm -f blib/arch/auto/X11/GUITest/GUITest.so
cc -shared -L/usr/local/lib GUITest.o -o blib/arch/auto/X11/GUITest/GUITest.so \
-L/usr/X11R6/lib -lXtst -lXext -lX11 \
/usr/bin/ld: cannot find -lXtst
collect2: ld returned 1 exit status
make: *** [blib/arch/auto/X11/GUITest/GUITest.so] Error 1
/usr/bin/make -- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
The guide talk about two more actions, that I am clueless about:
1. run the following 2 lines at every boot:
# setserial /dev/ttyS0 irq 4 port 0x220 autoconfig
# chmod a+rwx /dev/ttyS0
2. Run one of the scripts in X.
What are those lines do and how do I run them at every boot?
What is X and how do i run scripts inside?
Thanks
p.s
argotnaut, try this (that's what I did):
1. open the terminal (looks like a DOS screen, Applications->Accessories->Termial)
2. type this in the terminal: perl -MCPAN -e 'shell'
3. you will see this question: Are you ready for manual configuration? [yes]
4. type: n
5. wait until you see this: cpan>
6. type: install X11::GUITest
that's what i did and got the above error.
let me know if it helps.
Oren
www.prosoa.com
|
Edited by - mitchelln on 06/28/2007 06:54:18 |
|
|
|
oren
Starting Member
15 Posts |
Posted - 06/28/2007 : 12:45:46
|
Thanks for the quick reply mitchelln,
I am using Ubuntu 7.04.
I'll search for the Xtst development package in synaptic
and update you (and the rest of the world).
www.prosoa.com |
|
|
|
oren
Starting Member
15 Posts |
Posted - 06/28/2007 : 13:18:31
|
I searched for xtst in synaptic and found that I already have those:
libxext6 and libxtet6.
I installed those:
1. libxex6-dbg
2. libxext-dev
3. libxtst6-dbg
4. libxtst-dev
I run the install X11::GUITest command and got this:
GUITest.xs:41:27: error: X11/Intrinsic.h: No such file or directory
here is the exact output:
Writing Makefile for X11::GUITest
cp GUITest.pm blib/lib/X11/GUITest.pm
/usr/bin/perl /usr/share/perl/5.8/ExtUtils/xsubpp -typemap /usr/share/perl/5.8/ExtUtils/typemap -typemap typemap GUITest.xs > GUITest.xsc && mv GUITest.xsc GUITest.c
cc -c -I/usr/X11R6/include -I/usr/X/include -Wall -O2 -DVERSION=\"0.21\" -DXS_VERSION=\"0.21\" -fPIC "-I/usr/lib/perl/5.8/CORE" -DNDEBUG -DX11_GUITEST_ALT_L_FALLBACK_META_L GUITest.c
GUITest.xs:41:27: error: X11/Intrinsic.h: No such file or directory
GUITest.xs:42:28: error: X11/StringDefs.h: No such file or directory
make: *** [GUITest.o] Error 1
/usr/bin/make -- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible
Any idea?
www.prosoa.com |
|
|
|
oren
Starting Member
15 Posts |
Posted - 06/28/2007 : 14:01:24
|
update:
I installed xorg-dev and wacom-tools and run it again and got
a few warning and an error (mkdir /usr/local/lib/perl: Permission denied at /usr/share/perl/5.8/ExtUtils/Install.pm line 112)
here is the output:
Writing Makefile for X11::GUITest
cp GUITest.pm blib/lib/X11/GUITest.pm
/usr/bin/perl /usr/share/perl/5.8/ExtUtils/xsubpp -typemap /usr/share/perl/5.8/ExtUtils/typemap -typemap typemap GUITest.xs > GUITest.xsc && mv GUITest.xsc GUITest.c
cc -c -I/usr/X11R6/include -I/usr/X/include -Wall -O2 -DVERSION=\"0.21\" -DXS_VERSION=\"0.21\" -fPIC "-I/usr/lib/perl/5.8/CORE" -DNDEBUG -DX11_GUITEST_ALT_L_FALLBACK_META_L GUITest.c
GUITest.c: In function ‘XS_X11__GUITest_GetScreenDepth’:
GUITest.c:1715: warning: ‘scr_num’ may be used uninitialized in this function
GUITest.c: In function ‘XS_X11__GUITest_GetScreenRes’:
GUITest.c:1681: warning: ‘scr_num’ may be used uninitialized in this function
GUITest.c: In function ‘XS_X11__GUITest_GetRootWindow’:
GUITest.c:956: warning: ‘scr_num’ may be used uninitialized in this function
Running Mkbootstrap for X11::GUITest ()
chmod 644 GUITest.bs
rm -f blib/arch/auto/X11/GUITest/GUITest.so
cc -shared -L/usr/local/lib GUITest.o -o blib/arch/auto/X11/GUITest/GUITest.so \
-L/usr/X11R6/lib -lXtst -lXext -lX11 \
chmod 755 blib/arch/auto/X11/GUITest/GUITest.so
cp GUITest.bs blib/arch/auto/X11/GUITest/GUITest.bs
chmod 644 blib/arch/auto/X11/GUITest/GUITest.bs
Manifying blib/man3/X11::GUITest.3pm
/usr/bin/make -- OK
Running make test
PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/test....ok
All tests successful.
Files=1, Tests=23, 4 wallclock secs ( 0.13 cusr + 0.15 csys = 0.28 CPU)
/usr/bin/make test -- OK
Running make install
mkdir /usr/local/lib/perl: Permission denied at /usr/share/perl/5.8/ExtUtils/Install.pm line 112
make: *** [pure_site_install] Error 13
/usr/bin/make install -- NOT OK
www.prosoa.com |
|
|
|
mitchelln
New Member
66 Posts |
Posted - 06/29/2007 : 04:23:02
|
quote:
Originally posted by oren
update:
I installed xorg-dev and wacom-tools and run it again and got
a few warning and an error (mkdir /usr/local/lib/perl: Permission denied at /usr/share/perl/5.8/ExtUtils/Install.pm line 112)
You are doing this as the root user yes? You cannot compile up and install this as a normal user.
Cheers
Neill. |
|
|
|
oren
Starting Member
15 Posts |
Posted - 06/29/2007 : 12:41:31
|
I tun it as root, got some warnings but no errors:
Running make install
Installing /usr/local/lib/perl/5.8.8/auto/X11/GUITest/GUITest.so
Installing /usr/local/lib/perl/5.8.8/auto/X11/GUITest/GUITest.bs
Files found in blib/arch: installing files in blib/lib into architecture dependent library tree
Installing /usr/local/lib/perl/5.8.8/X11/GUITest.pm
Installing /usr/local/man/man3/X11::GUITest.3pm
Writing /usr/local/lib/perl/5.8.8/auto/X11/GUITest/.packlist
Appending installation info to /usr/local/lib/perl/5.8.8/perllocal.pod
/usr/bin/make install -- OK
let's assume that everything is ok.
I tun this command:
sudo setserial /dev/ttyS0 irq 4 port 0x220 autoconfig
and get this as a result:
Cannot set serial info: Device or resource busy
is it ok?
here are the rest of the instructions:
At every boot you should run the following commands (as root):
setserial /dev/ttyS0 irq 4 port 0x220 autoconfig
chmod a+rwx /dev/ttyS0
1.how do i run it on boot?
2.how do I run them as root (add sudo at the beggining of each line?)
After that run one of these scripts in X:
I dowoloaded the tablet6.pl but i don't know how to run it in X.
thanks
www.prosoa.com |
Edited by - oren on 06/29/2007 22:12:41 |
|
|
|
friendly.name
New Member
Germany
69 Posts |
Posted - 07/01/2007 : 17:39:57
|
Hello,
Please try;
setserial /dev/ttyS0 uart 16550
setserial /dev/ttyS0 irq 4 (not really need, better save than sorry)
setserial /dev/ttyS0 port 0x220
As i remember, the UART value is necessary.
Debian users only. Have a look for /usr/share/doc/setserial/serial.conf
and change the values to meet the needs for the ttyS0.
Delete all the wacom stuff inside of the X config file.
Sorry, it' over a year now that i have work with the little P1510 and P1610. Hope the information will bring you forward. Maybe you will have a look at some old stuff at http://home.arcor.de/dstauda . I will check the tread within the next week.
friendly.name
friendly.name
P1510 - T4010 - ST5011 - Windows - Linux |
|
|
|
oren
Starting Member
15 Posts |
Posted - 07/01/2007 : 21:10:42
|
Thanks for the reply!
setserial /dev/ttyS0 uart 16550
Cannot set serial info: Device or resource busy
setserial /dev/ttyS0 irq 4
nothing happened so I guess it's ok.
setserial /dev/ttyS0 port 0x220
Cannot set serial info: Device or resource busy
"Have a look for /usr/share/doc/setserial/serial.conf
and change the values to meet the needs for the ttyS0."
i opened this file. it's all commented and I don't understand what
do you mean when you say to meet the need of ttys0'...
here is the file:
###AUTOSAVE-ONCE###
###AUTOSAVE###
#
# If you want AUTOSAVE switched on, make the AUTOSAVE line above the
# FIRST line of the file.
#
# AUTOSAVE-ONCE, if it is first, will save the port status and then move
# itself to the second line of the file (thus effectively stopping further
# AUTOSAVEs).
#
# This is a sample serial.conf file. You should uncomment out and modify
# the relevant lines as necessary.
#
# These are the standard COM1 through COM4 devices
#
#/dev/ttyS0 uart 16450 port 0x3F8 irq 4
#/dev/ttyS1 uart 16450 port 0x2F8 irq 3
#/dev/ttyS2 uart 16450 port 0x3E8 irq 4
#/dev/ttyS3 uart 16450 port 0x2E8 irq 3
# These are the first set of AST Fourport ports
#
#/dev/ttyS4 uart 16450 port 0x1A0 irq 9 fourport
#/dev/ttyS5 uart 16450 port 0x1A8 irq 9 fourport
#/dev/ttyS6 uart 16450 port 0x1B0 irq 9 fourport
#/dev/ttyS7 uart 16450 port 0x1B8 irq 9 fourport
# This enables the new multiport masking feature, which is highly recommened
# for AST FourPort boards.
#
#/dev/ttyS4 set_multiport port1 0x1BF mask1 0xf match1 0xf
# These are the second set of AST Fourport ports
#
#/dev/ttyS8 uart 16450 port 0x2A0 irq 5 fourport
#/dev/ttyS9 uart 16450 port 0x2A8 irq 5 fourport
#/dev/ttyS10 uart 16450 port 0x2B0 irq 5 fourport
#/dev/ttyS11 uart 16450 port 0x2B8 irq 5 fourport
# This enables the new multiport masking feature, which is highly recommened
# for AST FourPort boards.
#
#/dev/ttyS8 set_multiport port1 0x2BF mask1 0xf match1 0xf
# These are the 3rd and 4th ports on the Accent Async board.
#
#/dev/ttyS12 uart 16450 port 0x330 irq 4
#/dev/ttyS13 uart 16450 port 0x338 irq 4
# These are two spare devices you can use to customize for
# some board which is not supported above....
#
#/dev/ttyS14 uart XXXXX port XXXX irq X
#/dev/ttyS15 uart XXXXX port XXXX irq X
# These are the ports used for either the Usenet Serial II
# board, or the Boca Board 4, 8, or 16 port boards.
#
# Uncomment only the first 4 lines for the Usenet Serial II board,
# and uncomment the first 4, 8, or all 16 lines for the
# Boca Board BB-1004, BB-1008, and BB-2016 respectively.
#
#/dev/ttyS16 uart 16550A port 0x100 irq 12
#/dev/ttyS17 uart 16550A port 0x108 irq 12
#/dev/ttyS18 uart 16550A port 0x110 irq 12
#/dev/ttyS19 uart 16550A port 0x118 irq 12
#/dev/ttyS20 uart 16550A port 0x120 irq 12
#/dev/ttyS21 uart 16550A port 0x128 irq 12
#/dev/ttyS22 uart 16550A port 0x130 irq 12
#/dev/ttyS23 uart 16550A port 0x138 irq 12
#/dev/ttyS24 uart 16550A port 0x140 irq 12
#/dev/ttyS25 uart 16550A port 0x148 irq 12
#/dev/ttyS26 uart 16550A port 0x150 irq 12
#/dev/ttyS27 uart 16550A port 0x158 irq 12
#/dev/ttyS28 uart 16550A port 0x160 irq 12
#/dev/ttyS29 uart 16550A port 0x168 irq 12
#/dev/ttyS30 uart 16550A port 0x170 irq 12
#/dev/ttyS31 uart 16550A port 0x178 irq 12
# This enables the new multiport masking feature, which is highly recommened
# for Bocaboard ports. Uncomment only the first line if you have a
# BB-1004 or BB-1008. Uncomment both lines if you have a BB-2016.
# These numbers assume the Bocaboard is located at address 0x100. If you
# change this, remember to change the port1 and port2 addresses.
#
#/dev/ttyS16 set_multiport port1 0x107 mask1 0xff match1 0
#/dev/ttyS16 set_multiport port2 0x147 mask2 0xff match2 0
www.prosoa.com |
|
|
|
oren
Starting Member
15 Posts |
Posted - 07/03/2007 : 16:32:13
|
In addition to the touchscreen I also have resolution problem when connecting to external monitor.
samengstrom has a detailed page that solves it, but the instructions are not for begginer.
can anyone guide me step by step? (I use Ubuntu 7.04)
http://samengstrom.com/nxl/10301/p1510_external_display_page.en.html
Thanks!
www.prosoa.com |
|
|
|
friendly.name
New Member
Germany
69 Posts |
Posted - 07/03/2007 : 16:46:05
|
Hi,
#/dev/ttyS0 uart 16450 port 0x3F8 irq 4
Unmark this line and change 16450 to 16550, 0x3F8 to 0x220
restart, guess, /etc/init.d/setserial
Do a dmesg to see whar happens.
Sorry, i do not have a P1610 at the moment, neither i have time to do some testing.
Friendly.name
friendly.name
P1510 - T4010 - ST5011 - Windows - Linux |
Edited by - friendly.name on 07/03/2007 17:01:36 |
|
|
|
oren
Starting Member
15 Posts |
Posted - 07/03/2007 : 17:57:45
|
great, i will try it.
"...guess, /etc/init.d/setserial"
I didn't understand that.
maybe you meant - restart and then run setserial again?
what are the arguments for this command?
thanks!
www.prosoa.com |
Edited by - oren on 07/03/2007 17:59:22 |
|
|
|
friendly.name
New Member
Germany
69 Posts |
|
|
Topic |
|
Topic Locked
